BH CARBON ATOM
The new AtomX Carbon brings together outstanding sporting performance and the most advanced electric technology. This is combined with the optimal lightness and stiffness of high modulus carbon.
We have used Hollow Core Internal Moulding production technology, featured in all high-end BH frames. High pressure is applied on the inner and outer mould to achieve the most compact material possible, thereby eliminating pressure variations that cause bubbles and imperfections.
This technology makes it possible to ensure the optimal thickness of the different parts of the frame, thus making it stiffer and more lightweight.
ATOMX CARBON REDEFINING CARBON
The AtomX Carbon frame has the same groundbreaking lines as the AtomX but they have been redefined and given a smoother finish thanks to the carbon. The freedom to create different shapes and the stiffness and lightness of high modulus carbon have enabled us to produce a frame that is 50% lighter, weighing 2 kilograms less. Made from 100% carbon, including the tie rod, rear chainstays and dropout.
Because the rear triangle is made from carbon, it is 123% stiffer.
It features a new routing for the travel seatpost that is more direct and natural, thus minimising the friction of the cable inside the cover and making it easier to install.
It comes with protectors on the down tube, chainstays and rear seat stays.
For the AtomX Carbon, we have developed new housings which completely eliminate noise and friction and insulate the motor and connections.
720 WH BATTERY
The built-in battery comes with the new 21700 cells, which provide the highest energy density available on the market (5 Ah per cell).
This allows us to house a 720 Wh battery in the down tube with the smallest crosssectional area available on the market, offering a range of 155 km.
The external charging port is located on the upper side and can only be accessed by the user, meaning that it can be charged without needing the bicycle.
Each user will have a stylish smart key wristband that will allow them to remove the battery, so that they can charge it without needing a key. Each smart key wristband has a unique ID for each bicycle. It is a sealed wristband (IP67) that is waterproof and dustproof.
The battery can be charged to 80% capacity in 3 hours thanks to the 4 A fast charger.
AUTOMATIC CARE SYSTEM
The built-in batteries feature a highperformance BMS (Battery Management System) that ensures very low consumption and prolongs the life of the battery if it is unused for long periods.
Deep sleep mode is activated automatically and allows a battery with 10% capacity to be recharged up to 400 days later.
BROSE S MAG MOTOR
AtomX Carbon e-bikes come with the Brose S Mag motor, which is compact and has a magnesium construction, reducing its weight by up to 2.9 kg. This motor has proven robustness, as it was developed from the Brose S motor, which has been on the market for over 4 years.
Its internal drive belt and clutch, which disconnects the motor, ensure the smoothness of the motor and reduce the noise and fiction to a minimum when not using assistance.
It provides assistance up to a maximum cadence of 130 rpm, with its optimal operating point being with the user at high cadences (90-120 rpm).
It also offers a higher level of configurability, with the ability to customise assistance modes and acceleration on the display.
In a nutshell, this is an extremely lightweight and compact motor, 15% lighter than its predecessor the Brose S Alu motor, with a minimal visual impact and a low centre of gravity, which offers no resistance when in no assistance mode.
FULL SUSPENSION TECHNOLOGY
The new double suspension ATOMX models feature BH-patented technology: Split Pivot.
The compact design of the suspension helps to maintain the frame's structural stiffness, ensuring a lighter weight and enabling the bike to be used without a battery and perform at the same level as a conventional bicycle.
Its geometry is very similar to the BH Lynx range, with the rear measuring only 460mm, enabling dynamic riding and notably improving handling during descents.
Split Pivot technology consists of a suspension system with floating shock absorption, developed exclusively for BH Bikes and based on the traction, pedalling efficiency, manoeuvrability and rigidity of the bicycle.
This system allows the three forces to act on the bicycle separately. Pedalling,braking and suspension.
LCD COLORED INTEGRATED HUD
The display is in front of the stem, allowing the rider to maintain a proper frontal view on tracks. Placing the HUD here makes it easier to anticipate an accident than in the traditional position on the stem.
Furthermore, to increase its impact resistance, the display is housed in a reinforced aluminium body.
It has a 2.2" transflective LCD colour screen, with a capacity of 256 MB of RAM and a Cortex A7 processor on which the Linux operating system runs.
- 2.8" central transflective LED colour display to make it easier to read in sunny and extremely bright conditions.
- Information about range, % battery capacity, time, speed, total distance or trip distance.
- Selection and identification of the assistance mode using a colour code.
- Lights on/off.
- Throttle function up to 6 km/h.
- System adjustment between kilometres and miles.
- Setting of parameters for the different assistance modes.
- System and battery diagnostics.
- USB micro charging port.
- App connectivity: Navigation. Mobile notifications (alerts, WhatsApp,calls, etc.).
ERGONOMIC LED CONTROLLER
The ergonomic controller on the handlebars has LED indicators and a vibration mode to indicate how the functions are configured (low battery level, etc.)
- X System
- Brose S Mag
- 25 Km/h
- Up to 155 Km
- Display panel
- Colored HUD
- Display cover
- Upgrade kit
- Atom-X App Atom-X GPS Tracker Light cable
- CS, SS, BB protector
(double integrated) and
- iLock + Smart key bracelet
ATOM-X CARBON LYNX 6 27'5 PLUS PRO EAGLE ER979
- 160 mm Full Suspension Carbon 27´5"+ internal cable routing
- Shock absorber
- FOX FLOAT DPS Performance 150 mm
- FOX 36 FLOAT Factory 160mm 15QR
- BH A-Head
- Shift levers
- Sram NX Eagle 12SP
- Rear derailleur
- Sram GX Eagle 12sp
- Sram 32T
- Bottom bracket
- Sram EAGLE 12sp (11-50T)
- Sram Eagle NX12
- Front brake
- Shimano XT 200mm 4 Piston
- Rear brake
- Shimano XT 200mm 4 Piston
- DT Swiss H1900
- Schwalbe Magic Mary 27,5PLUSx2,8 TR
- DT Swiss
- Stainless Steel
- Fizik Taiga
- Saddle clamp
- Quick Release
- Kind Shock ETEN-I
- BH MTB Light Alloy Riser 780mm
- Ergon GE10-Factory
- M / L / XL